-
Heat Cure Epoxy System formulated for instrument and power transformers. Cured epoxy exhibits excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling performance. Product meets UL94-HB flammability requirements. CLR 1336 / CLH 5515
-
Cured epoxy exhibits excellent thermal stability and thermal cycling performance. A two component, heat cured epoxy system, developed specifically for use on instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling performance. Product meets UL94-HB flammability requirements. CLR 1337 / CLH 5515
-
Extremely strong adhesive. Remains strong at elevated temperatures. A high performance, room temperature curing, 100% solids, epoxy adhesive. This product bonds to a wide variety of substrates and was specifically developed to seal porous metal substrates. CLR 1396 / CLH 6930
-
General Purpose Epoxy. An unfilled, room temperature cure, clear laminating system. Its low viscosity gives the system excellent wet -out properties to fibreglass and other reinforcing fibres. The material will also saturate wood readily. For a faster system use hardener CLH 6333. CLR 1625 / CLH 6330
-
General Purpose Epoxy. An unfilled, room temperature cure, clear laminating system. Products low viscosity gives the system excellent wet-out properties to fibreglass and other reinforcing fibres. The material will also saturate wood readily. CLR 1625 / CLH 6333
-
Abrasion Resistant Epoxy. An abrasion resistant, two component epoxy surface coat. CLR 1710 / CLH 6710
-
UL 94-V0 system for potting and casting small electronic parts that require thermal shock and thermal cycling performance. A two component, low viscosity, room temperature cure epoxy system. Material has yellow card UL94-V0 rating, and contains non abrasive fillers suitable for meter mix dispense. CLR 1796 / CLH 6580
-
Heat Cure low-stress, extremely tough, epoxy casting system casting system for large bushings, insulators, power and instrument transformers. Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1876 / CLH 6631
-
A two component polyurethane casting system. Product has long pot-life and cures to a hardness of 65 Shore D. XID 1681 / XHD 1652
-
1:1 machine dispense adhesive. Adhesive for bonding synthetic aggregates to metal. A medium viscosity, room temperature curing, two component epoxy adhesive. Product was developed with improved thin film set time when bonding metal substrates. XR 52092 / XH 62093
-
Machine dispense friendly, tough, casting epoxy system. Increased flexibility when compared to CLR 1831 family. A two component, low stress, heat cure epoxy system specifically developed for use on instrument and power transformers. The product if filled with non-abrasive fillers, making the product suitable for machine dispensing. The cured material exhibits excellent thermal stability and thermal cycling endurance. Product meets UL 94-HB flammability requirements. XRD 1321 / CLH 5185
-
The product cures to a shore hardness of 50 A, low viscosity, soft system. A two component, very flexible epoxy system. XRD 1347 / XHD 1348
-
4:1 Ratio, soft system. A two component unfilled, flexible epoxy system. Product features low viscosity, long pot life and cures to a shore hardness of 70A. XRD 1501 / CLH 6090
-
2:1 machine dispense adhesive. Bonding abrasive wheels and disks. A two component epoxy system suitable for potting, casting and adhesive applications. Product gels quickly and has good thermal cycling endurance. Material is filled with non-abrasive fillers making it suitable for machine dispensing. XRD 1575 / XH6 1418